Wall calendars 30% off with code CAL30. Order by Nov 30, ships by Dec 10. No design, no problem.

Blog

Print-Ready File Setup: Bleed, Resolution, and the 5 Mistakes We Fix Most

· 9 min read

Loading paper onto print press

A print-ready file is a flattened PDF, built at 100% of the finished size, in CMYK, with images at 300 ppi at that size, 1/8" (0.125") of bleed on every edge that trims, all text and logos pulled at least 1/8" in from the trim line, and fonts embedded or converted to outlines. Hit those six things and the file goes to plate without anyone touching it. Miss one and it comes back to you, or worse, it doesn't and you get 500 flyers with a hairline white edge down one side.

Here is what each of those actually does on the press, and the five problems our prepress team fixes more often than all the others combined.

Why bleed is 1/8 inch and what happens without it

Bleed is artwork extended past the trim line so that when the stack is cut, the ink runs to the very edge of the sheet. The standard is 0.125" on every side that trims. On a 6" × 9" postcard with a full-colour background, the artboard is 6" × 9" and the background image extends to 6.25" × 9.25", centred.

Bleed exists because the cut is not perfect. Printing happens on a large press sheet with several pieces ganged up on it, and the finished pieces are cut out of that sheet in a guillotine stack. The stack shifts fractionally as the blade comes down, and the sheet itself moves a hair as it feeds through the press. Neither movement is large, but it is larger than zero — so a background that stops exactly at the trim line will, on some percentage of the run, leave a thin white sliver along an edge.

A file with no bleed leaves us two bad options: shrink the whole design slightly so the artwork covers the trim, which throws off your margins and can push text off-centre, or print it as supplied and hope. If your design has a white border by intent, you don't need bleed on that edge — the white is the paper. Bleed is only required where ink is meant to reach the edge.

Safe area: keep live matter 1/8 inch inside the trim

Safe area is the margin inside the trim line where nothing important should sit. Pull text, logos, phone numbers, QR codes, and anything else you would notice being clipped at least 1/8" in from the trim on every side, and 1/4" if you have the room.

The reason is the same movement that makes bleed necessary, running the other direction. If the cut lands a fraction inside the trim line, anything sitting right on that line loses part of itself. A phone number 1/16" from the edge can come back with the bottoms of the digits shaved off.

Thin borders are the worst version of this. A 2pt frame running parallel to the trim, an eighth of an inch in, will look perfectly even in the PDF and visibly uneven on the finished piece — thicker on one side than the other — because a shift of a fraction of a millimetre is invisible against a background and glaring against a straight line. If you want a border, make it thick enough that a small shift doesn't read as a mistake, or drop it.

Resolution: 300 ppi at final printed size

Images need to be 300 ppi at the size they appear on the finished piece, not 300 ppi at whatever size the original file happens to be. This is the number that catches people out, because scaling changes it. A photo that is 300 ppi at 2" × 3" is 150 ppi when you drag it to 4" × 6" in the layout, and 150 ppi prints soft.

The practical test: check the effective or actual ppi in your layout software's links panel, which reports resolution after scaling. That number is the one that matters.

The most common source of a low-resolution image is a website. Images on the web are saved at screen resolution to keep pages fast, so a logo pulled off your own company site is usually far too coarse to print at any useful size. Ask whoever built the site for the original vector logo file — an AI, EPS, SVG, or vector PDF. Vector art has no resolution at all; it is drawn from maths and stays sharp at any size, which is why logos should always be vector on a printed piece.

One exception worth knowing: large-format work viewed from a distance can go below 300 ppi because the viewer is further away. On anything held in the hand — a business card, a flyer, a brochure — 300 ppi at final size is the number.

Colour: build in CMYK, and know which black you're using

Press ink is CMYK — cyan, magenta, yellow, and black. Screens are RGB. RGB has a wider range of colour than ink on paper can reproduce, so an RGB file has to be converted before it prints, and some colours shift when it is. Bright saturated blues, vivid greens, and neon oranges are the usual casualties: they go duller and slightly darker in CMYK because there is no ink combination that reaches them.

Build the file in CMYK from the start so you see the conversion while you can still do something about it, rather than discovering it on the finished piece. If you supply RGB, we convert it, but we are converting blind to your intent.

Black has two forms and they are not interchangeable. Small text should be 100% K only — a single ink, one plate, perfectly crisp edges. Small text built from all four inks goes fuzzy, because the four plates have to register against each other and any tiny misregistration shows as coloured fringing on the letterforms. Large solid black areas are the opposite case: 100% K alone can look washed out and grey across a big field, so those want a rich black with other inks underneath. If you have a big black area, tell us and we will give you the build for the stock you're printing on.

Also check for stray spot colours. A Pantone swatch left in a file destined for a four-colour job either gets converted at our end or, if the job is genuinely being run with a fifth plate, changes the price. Convert spot to process yourself unless you have specifically ordered a spot colour.

Fonts: embed them or outline them

Send a PDF with fonts embedded, or convert type to outlines before you export. A font that lives on your machine and is not in the file will be substituted by whatever the RIP has available, which reflows your entire layout without telling anyone.

Embedding is better than outlining if you have the choice, because embedded text remains text — we can still fix a typo, and the type renders with hinting. Outlining turns letters into shapes, which is bulletproof but permanent, and very small outlined type can thicken slightly. Either beats a missing font.

If you send us a native file instead of a PDF — an InDesign or Illustrator document — package it. The packaging function collects the fonts and linked images into one folder. A native file sent on its own almost always arrives with missing links.

The five mistakes we fix most

1. Artwork built to exact trim size with no bleed. A 6" × 9" postcard supplied as a 6" × 9" PDF with a background photo that stops dead at the edge. This is the single most common file problem we see. Fix: rebuild the document at trim size with 0.125" bleed set in the document setup, extend the background past the artboard, and export with "use document bleed settings" ticked.

2. Images lifted from a website. A logo or product shot at screen resolution, blown up to fill a panel. It looks fine on the monitor at 100% zoom and prints visibly soft. Fix: get the vector logo or the original camera file.

3. Text sitting on the trim line. Usually the address block, the phone number, or a footer that got nudged. Fix: pull everything 1/8" to 1/4" inside the trim.

4. RGB files, and black text built from four inks. Both come from designing in a screen-first tool and exporting without changing the colour mode. Fix: set the document to CMYK, and check that body copy and small headlines are 100% K only.

5. Multi-page files supplied as reader's spreads. A four-page brochure sent as two spreads instead of four single pages. We have to split them, and if the spread was built with the fold in the middle of a background image, splitting it can reveal that the image never had bleed at the gutter. Fix: export multi-page documents as single pages, in reading order.

The extra rules for folded pieces and mailers

Folded pieces need panel widths that are not all equal. On a standard tri-fold, the panel that folds innermost has to be slightly narrower than the other two, or it buckles against the fold and the piece won't lie flat. How much narrower depends on the thickness of the stock — heavier paper needs more. Our 8.5" × 11" brochures are $80 for a box of 100 printed flat, with folding quoted alongside, and if you tell us the fold style before you build the file we will tell you the panel widths for the stock you have chosen. Build to equal thirds and the finished piece will look wrong at the fold.

Mailers need a clear address area. On our 6" × 9" postcards, $50 for a box of 100, the address side needs a defined region kept free of artwork so the address block, indicia, and barcode can go down and get read by USPS equipment. Download the template from the postcard configurator before you design rather than after — reworking a design around a clear zone you didn't plan for is a lot more work than leaving the zone empty in the first place.

Door hangers have their own geometry: the die that cuts the hole and the slot removes part of the top of the piece, and any artwork inside that area disappears. Door hangers are $100 for 100, and the template in the configurator shows the die line so you can see exactly what survives.

What to send us

Send a single flattened PDF — PDF/X-4 or PDF/X-1a if your export dialog offers them — at 100% size, in CMYK, with bleed included and crop marks offset outside the bleed. One file per piece; for a two-sided job, one file with front as page 1 and back as page 2.

What not to send: a Word document, a PowerPoint slide, a JPEG of a design, or a PDF exported at "smallest file size" (that preset downsamples your images and can strip the bleed). We can work with most things, and we'd rather have your Word file than nothing, but every step between what you send and a press-ready PDF is a step where something can change without either of us noticing.

If you're not sure whether a file is right, send it before you order. Checking a PDF takes us a few minutes. Reprinting 250 business cards at $150 because the logo was pulled off a website takes considerably longer, and someone has to pay for it.

Get a real price on your own job

The configurator quotes from the same estimator our shop runs on — a real number for your size, stock and quantity, not a range.

Start my order